7011 Network Interface Module

No longer available. For information purposes only.

Category:

Description

The Datascan 7011 Network Interface module allows connection for a host computer or local display device into a Datascan 7000 Network at any point. Used in applications when the host PC is remote from the Datascan network.

The 7011 is a low-cost alternative to the 7010 Measurement Processor at a location where access to the Datascan 7000 Network is required but there is no need for any local measurement. The 7011 gives the host 500V isolation from the RS485 network thereby protecting both host and network from undesirable large voltages.

Features

  • Remote Host Operation
  • Local Monitoring Facility
  • 38.4 kBaud data transfer
  • A comprehensive range of built-in software commands
  • 500V Isolation from Network
  • High and low-speed data acquisition
  • Compact DIN Rail Mounting

Specifications

  • RS485 Network
    Transmission Rate : 93.75kBaud
    Data Rate : 1000 results/sec
    Total Channels/network : 1000
    Max. No. of nodes (processors) : 32
    Max. Network Length : 1.2 km (4000 ft)
    Isolation : 500Vdc
  • RS232 Port
    Baud Rates : 4800, 9600, 19k2, 38k4
    Isolation : 500Vdc
    Max Distance (direct) : 10m to host
  • Recommended Network Cable
    Belden 9207 : upto 1.2km
    Belden 8761 : upto 300m
  • Power Requirements:
    24V AC or DC @ 500mA
    Battery Backup life : 5 Years (unpowered)
  • Dimensions : 230 W x 80 D x 123 H (mm)
    Weight : 600g
  • Environmental:
    Operating Temp.Range : -10 to +60 °C
    Storage Temp. Range : -20 to +80 °C
    Relative Humidity : 90% non-condensing

Documentation

Most major SCADA packages support Datascan and an OPC Server is also available.  Please contact us for more information.